Hello all, After a few years absence I have returned to trying to digipeat through the ISS with my Icom IC-7100 and a very new AnyTone AT-D828UVii Plus handheld With the Icom IC-7100 I have both trans

Hello all, I have returned to UISS and digipeating after previously using a Kenwood TS-2000. I now use an Icom IC-7100 and was struggling to get it to Transmit (TX), I see other messages with a simila

Hi All. I've got UISS sucesfully RX APRS on my Icom IC-7100. I now want the TX side to work but cant find any connection with the usual Omni-rig type setup. How do I do it please?

Hello, I see its been a while since there have been any postings but I looking to see if anyone in the USA has made a New England area version map to use in this program. I use the program mostly for

Additional info: IC9700 gives me com4 and com5. Receiving packets on screen if I use 4 or 5 at 19200 . I have the put the cat.dll AND ptt.dll files in the soundmodem114 folder. With COM4, The cat.dll

Hello, I have UISS running in receive mode with UZ7HO soundmodem and need a little assist getting it to transmit via my Icom 9700 radio. The radio gives me com ports 3 and 8 (are these to me met by se

Is there a way to filter messages/packets by distance from my location? At least I haven't figured out how to do it. It would be handy to have a filter where I can select like 30 miles or 60 miles fro

Hoping someone here has a working UISS setup with an actual hardware TNC, like the KPC-3, instead of a soundcard modem and will help me understand how to make that work with the AGWPE and UISS setting

Solved it. APRSIS32 Had a receive channel open to the IC9700. In setting that one up, I had listed COM7. This is the IC9700. I also listed its Rx/Tx sound codecs. So the mere fact that another program

Hello UISS@ON6MU.groups.io Actually I don't know a better place to ask this one. I use UISS and P-E-Pro (AGWPE) to both work people off ISS as well as to work a couple of friends on 2m. Usually I am u

I hope this is the proper place to ask this question. I've been using UISS for just a week and I have been able to send beacons to the ISS. Since I've received a few email messages for a stations, I k

In UISS (or MapView), is there a way to filter/show APRS messages that were not digipeated (show only messages that were heard directly to my radio)? I finally made a DIY VHF antenna and I wanted to u

Hello UISS@ON6MU.groups.io I am using UISS with Packet Engine Pro. Has anyone ever gotten UISS to make the IC9700 transmit. My Kenwood D710GA works fine from UISS to AGWPE but I can't seem to make the

Hello Everybody, There is a small update of UISS available v5.4.4. The changes: • The length of the "To:" field is increased to 10 characters instead of 8 (Thanks KD7YZ Bob) • bug fix: checking for ne

Hello UISS@ON6MU.groups.io I am trying to enter "KG4DVE-11" into that "To:" box. Program won't let me. It cuts me off at KG4DVE-1 . Ther IS a station with that SSID I want to contact it. -- 73, KD7YZ

hi, I'm using UISS 5.4.3 in Win10Pro laptop with UZ7HO v.1.13. Every thing seems to be ok, except the Connect button is grayed, so no any actions with that. 73 de Ismo, OH1NHW

hi, I just joined to Uiss-group and want to send a message to other members. I installed the Uiss & Uz7ho modem, and I’m running with my old IC970A here in south western part of Finland. I’v been work

Hello All: Trying to setup the Kenwood TM-D710 with UISS via Packet Engine Pro for APRS with the ISS. I am able to TX to ISS and my packets are being Digipeated (confirmed via another amateur radio st

Was fooling around last night during a high ISS pass and accidentally caught it in frame with my turnstile antennas. Using alt/azi tripod and my trusty, old Nikon D100 DSLR, manual focus 20 mm Nikkor,

The ISS FM V/u analog voice repeater is currently in operation and the next change of status back to packet radio (APRS) is for late September. It's too bad that the ISS can only support one active mo